The best pipe fitting molding company

It is one of the best Project of Sino. It has a dedicated workshop that only covers the work of preparing fine pipe fitting mould of best quality that can be used and exported worldwide. This pipe fitting mould is a different branch and field work for Sino Holding Group that is expertise in designing and manufacturing various types of PVC, PPR, PP and PE fitting system moulds. When it was established, Sino had accumulated abundant experience of more than 10 years that helped itself in developing the product quality and establishing itself as one of the best Pipe Fitting Molding Company.

Sino has a very strong designing capacity for irregular shaped fitting moulds, including collapsible cores, curve sliding system, unscrewing system driven by motor, multi-direction branch fitting connector moulds. For the PVC pipe fitting molds solution the PVC machine also should be different than the standard injection machine. Different machines have different standards of classification. You can change the below information for your plastic machine according to your convenience:

• Hard chrome plated screw, nozzle (with enlarge nozzle hole), and nozzle flange are adopted to ensure the quality of PVC production and extend the life of the mechanical parts, All the components are highly anti-corrosive.

• Widern the safety door design, equipped with double core pulling devices.

• Barrel: foced cooling by compressed air through air channels in individual noses with independent control, or screw oil cooling connect to oil temperature controller, to avoid thermal degradation of PVC powder in barrel.

• Enlarge hydraulic motor, to fit the high torque requirement for PVC plasticization.

• Harden chromed nozzle that ensures product flow and volume.

Oversize hydraulic motor to match the large torque requirements of PVC.

Read More

The advantages of production line manufacturing

High capacity production, especially a line of diverse products has been the cornerstone upon which the modern industries have been based on. This simple aim has been a part of the manufacturing industry since the Industrial Revolution and today almost every other non manufacturing sector is directly on indirectly dependent on the formula of mass production lines of the manufacturers. In this sense, the medical industry is no different as it depends on its large variety of products starting from huge ECG machines to a tiny syringe. The syringe is among the best known and oldest of medical instruments and the need for it is being answered by Syringe Production Line of manufacturers all over the world. In the same manner a plastic product line has been a boon for the plastic dependent companies and the masses.

The medical industry is a multi billion dollar industry whose needs begin from a lowly hypodermic syringe to dental devices and huge machines. The medical supply industry is the answer yet they depend invariably on manufacturing industries and they also need to ascertain the quality of the materials as they could prove to be the thin line between life and death. Products like syringes, needles; dressing, sutures, etc. need to be of the highest quality and precision and must adhere to medical standards of use. The medical goods manufacturing industry also produces laboratory equipments and other such medicine related equipments like dental and ophthalmic items. The supplies, especially industrial supplies are ordered with infinite care and the quality and accuracy checks are very stringent due to their use in tricky procedures like operations. The huge needs of such medicinal equipments often demands for huge production without compromising on the accuracy and safety which is a bit difficult considering the fact that time must be given to ensure precision. At this juncture the use production lines are bought in and with them the accuracy is maintained as well as the demands are fully met with. The production line manufacturing have also been used in several other industries like pipe, mostly PVC pipes production in which durability is a required quality.

Sino-Holdings group are an established name in plastic as well as medical supply manufacturing using production lines. They also specialize in Pipe production line where quality is not compromised due to lack of adequate time. The company has maintained its reputation among the medical industry for its quality of goods and it provides an extra facility too .i.e. sterility of the items which is a must have in medical instruments especially smaller mechanical ones like syringes, sharp instruments, hypodermic needles, etc. Due to such added services, Sino-Holdings are a preferred brand for newer as well as older players in the medical supply chain.

Read More

Essential Know how on the PET manufacturing industry

The plastic bottles and other hollowed out objects that are found in daily use are auxiliary production results of plastic molding processes. The process of development of such hollow containers especially made of either soft or hard plastics is called the Pet Stretching method. The method is an offshoot of the plastic industry and it accounts for a sizeable portion of the total with its prime customers being companies that sell their product mostly liquid, in plastic containers of all sizes and volumes. The material that is most often used in pet forming is thermoplastics and this is due to the materials unique ability of being easily pliable on heating and then returning to the solid state upon cooling. This makes it almost the best option for producing pet jars and bottles.

PET or Polyethylene Terephthalate is a form of thermoplastic under the polyester family that is used in synthetic fibers and especially in liquid containers. The PET bottle was introduced in the early 1970s and since then has replaced glass bottles as liquid containers due to its durability and cost effective ability. The manufacture of the PET bottle is of two varieties: the first procedure is the general procedure that involves a single Pet preform machine in which every step of the manufacturing process has been installed. It is one of the easiest methods of production that is widely used as it significantly lowers the time, energy and manpower consumption thus effectively reducing costs. The process is generally used by PET bottle manufacturers where slight lack of precision is not a huge problem and mass production is the aim along with lower costs such as in the production of soft drink bottles. The second method of production is a bit expensive and yet is precision based; it includes the PET molds which are shaped into containers like test tubes and burettes which rely almost entirely on accuracy. This involves a PET preform mold that is shaped using Injection Stretch Blow molding process in which liquid PET is injected, forged and then cooled. Every step is taken up separately allowing for better control on the accuracy yet the same processes make it time taking.

The internet has hundreds of online Pet preform machine makers and suppliers yet reliability could be a huge factor in determining one’s choice. Sino-Holdings Group is one such highly reliable as well as a reputable brand in the global market that is known for its quality and service. As a well known Pet preform machine supplier, Sino-Holdings Group use the best in class materials and the technicians have the option of using high speed and precise instruments developed by Japan. The company specializes primarily in manufacture of a huge range of PET based products and plastic injection products.

Read More

In depth information on In Mold labeling

The soft drink or cola has been a popular drink since decades and the bottle is one of the most easily recognizable containers. But have you ever wondered how the label seems a part of it as if painted on it or else the company logo on the back of a laptop or the colors and designs on any plastic product? Though it may seem complex yet this simple process of attaching labels to either plastic or glass is called in mold labeling or the IML technology.  Mold labeling can also be found in PVC pipes.  The process is an offshoot of the huge plastic molding industry and it has been instrumental in designing the huge range of plastic products that we see today. The process of In-mold labeling is the final part and plastic label is attached during the manufacture of the plastic pieces through several different processes like injection molding or thermoforming. The process is quite a cost effective measure as it reduces the man power and time that is spent in sticking labels to the end products. Plus it also helps in retaining the label that sometimes in case of hand or machine stuck labels, get torn off during transit or use. The in mold labeling process is starts just after the injection molding process. In this the required colors are first added and then after the molds are formed, reels of labels are added which are then stuck either by heat or static electricity. The oldest procedure is by coating the label with heat seal and then applied on with a heat resistant ink and finally it is attached to the bottle. The two processes that are today most widely used are vacuum or compressed air and static electricity. Static electricity labeling is done by using charged electrodes and the process begins with charging the label first. Then it is taken to the bottle and the label then attaches itself thus completing the process. The labeling procedure and the required auxiliary equipments rarely come along with the injection molding machines and thus they have to be attached separately after installation. The PVC molding technology also depends on labeling to some extent and the pipes are labeled using some of the above mentioned processes as labeling these huge pipes separately are a wasteful venture.

Sino- Holdings Group is a reputed name in the molding industry and they have been regarded since decade’s long position as a force to reckon with. The plastic molding industry and the smaller auxiliary services such as in mold labeling have been their area of expertise. They not only manufacture but also supply the essential know how to customers plus they are also global leaders in the supply of high quality and precision based machines and auxiliary equipments. Contact them today for more information.

Read More

The Best place to search for plastic molding solutions

The plastic injection molding industry is rapidly evolving into a multi billion dollar industry as its product now seem to touch every aspect of an individual’s life. From the common toothbrush to a billion dollar spaceship, the products of the molding industry have spanned huge dimensions of life and society. The industry has unfolded the potential of plastic and its usage in human society and with the invention of the plastic injection molding machine the industry has now smoothened out our life in many more ways that are too many to count. The industry has since it inception taken huge steps towards world domination and with the recent unveiling of high speed and precision based machines and equipments for injection molding the future and the aims has since become clearer. According to recent statistics for the year 2011-12, the injection molding industry alone accounts for the production of more than 39% of the plastic produced in the world, and that statistic is in no ways a small amount.

The plastic injection machines primarily come in three varieties – a general purpose machine that is best used either in small industries or workshops and their precision levels and manufacturing quality are strictly alright. They are rarely suited for large manufacturing and quality control process. The second variety is the precision based large sized machines which are custom made to suit industrial tastes. This High Precisse Injection Machine is meant for manufacture of precise products that adhere to international standards and have the ability to produce huge number of end products to suit customer needs. These High Precision Injection Molding Machines are the real heavyweights of their segment and are the first choice for companies and this is due to their larger capacities and volume of production. The third variety is the High Speed Injection Machine that specializes in faster production levels and consumes less time and energy and is strictly used on a smaller level. It is the precision based machines that are highly sought after and few companies can boast of producing the best line of high performance machines like Sino Holdings Group. The company is widely regarded as the best place to search for not only plastic injection machines but also for production and for plastic molding solutions. A reputed brand that has created a niche in the global molding market on the dint of its professionalism and quality, Sino Holdings Group often proves the best option for customers all over the world. The company has its base in China and from there it continues to satisfy customers all over the world since decades and at the same time providing technological support and know how to firms at the best price in the market. If you are looking for plastic molding solutions then check them out here.

Read More

The Why’s and how’s of Plastic injection Molding process

The invention of the plastic polymer stands as the single most important invention of the early 19th century. Charles Goodyear the inventor of the process of vulcanization was instrumental in increasing the pace of plastic usage and truly helped us in harnessing the unique material. With the popularity of plastic was born the plastic molding industry way back in the late 1800s. The plastic injection molding process has in the truest sense of the word has transformed the plastic product making into a fully fledged industry that supplies its services and products to almost every sector of the economy and manufacturing processes. This has led to a revolution in consumer goods as well as industrial items as the materials that were previously used were cheaper and better. The injection molding machine has been instrumental in revolutionizing the field of plastic molding technology and with it the plastic manufacturing industry. Consumers now have access to different and previously unseen plastic products ranging from the computer that you are looking at right now and plastic factory equipments to almost real looking molded food replicas on display in shops.

A plastic injection molding machine depends on a time tested method of production .i.e. manufacturing using a mold. An injection molding machine consists of an injection system, clamping unit, molds and a temperature and pressure control system. The process begins when the selected plastic, usually thermoplastics is melted in the hydraulic system of the injection machine and then it is injected under a controlled environment into the specific molds and then allowed to cool. After cooling the molten plastics takes up the shape of the mold and is then released to give out the finished product. The process is quite easy and time saving plus with it a large consignment of products can be manufactured. Extra colors or any other features like attaching labels to plastic bottles can also be possible with the process thus reducing labor significantly and that in turn reduces costs.

Plastic molding equipment of the finest quality is easily available on the internet provided one knows where to look. The materials and the equipment should be of the best quality and must come with several extra features and services in order to ensure a free flowing production process sans hindrance. Quality ensures that the production process and the rate of production never slow down. Manufacturers and businessmen should check out the credentials of the firm before committing and also ensure that the sellers provide Plastic injection solution and after sales service which will go a long way in paving the way to success with the injection molding machines. Here is a reputed firm that prospective buyers should check out.

Read More

Advanced Technology has Led to Improved Plastic Molding Equipment

Plastics have become ubiquitous in our lives despite the controversies surrounding it. It is not possible to think of any area of our lives where plastic in some form or the other is not used. Unlike, the earlier plastic manufacturing processes, the advancements in technology have led to improved plastic manufacturing. The latest plastic molding technology means that plastic can be recycled and eco-friendly plastics can be created. Over the years the plastic molding equipment has also changed and for the better; instead of fresh plastic being used every time for a new product recycled plastics are regularly put to use.

Integrated computer technology has ensured that plastic factory equipments for molding has become much superior and complicated sizes, shapes and designs can easily be manufactured. Molds have a huge number of uses. A few of the most popular molds include jewellery molds, ice cube trays, chocolate molds, molds for playdough, molds for cooking and art accessories. Defense goods, medical kits as well as household appliances/electronics all make extensive usage of molds.

Molding is the method by which a pliable material is given shape with the help of a rigid model called molds. Manufacturers use different types of molding to churn out products. With blow molding, hollow parts of plastic are formed. There are three types of blow molding machines; blow injection, stretch blow molding and extrusion blow molding equipment. With plastic molding equipment using the injection process, the applications are limitless. Simple carry bags, bags for packaging, cans or bottles for beverages, accessories for the computer or automobile parts, toys, gifts, cosmetics can all be manufactured using the advanced plastic molding technology. From the simplest of things to the most complicated like life-saving devices, plastic injection molding technology is capable of churning out high quality products. Stretch blow molding is preferred for molding bottles and is extensively used in the bottling processes of soft beverages, mineral water, farm chemical, oil and edibles. For instance, pet molding equipments can manufacture bottles in any shape or size. Extrusion blow molding equipment is good for manufacturing container goods for PE, PP or PC and uses both mechanical as well as pneumatic systems. Manufacturers who specialize in plastic molding equipment use a variety of molding machines. For example, a candle molding machine is utilized for making candles, in mold labelling machines are used for packaging industry and to make egg trays, pallets or trays, pulp molding equipment is widely used.

Although, plastics generate a lot of controversy and its usage, extensive or otherwise is even banned in many countries, the fact remains, that plastic has permeated every aspect of our lives. With constantly improving plastic molding equipment, it is possible to manufacture environmental-friendly and reusable plastic products.

Read More